Use and Care Manual

21.25”
7.125”
1/2” NO PRINTING AREA
.5”
OVERALL DIMENSION: 7 1/8” X 21 1/4”
NO PRINTING AREA OF 1/2” TO ACCOMMODATE GLUE AREA OF LABEL
GLUE LAP CAN BE ON EITHER END OF LABEL. DIFFERENT MACHINES USE DIFFERENT POSITIONS
EAR HOLES ARE 1 3/8” IN DIAMETER. THEY ARE 10 1/4” APART, ON CENTER.
IT IS BETWEEN THESE TWO HOLES THAT THE FRONT OF LABEL USUALLY FALLS.
DIRECTIONS COPY GOES HERE
FRONT COPY GOES HERE
10.25”
10.25”
7”
THIS TEMPLATE IS A GUIDE ONLY. YOUR ARTWORK SHOULD BE
COMPOSED TO FIT THE ACTUAL CAN YOU ARE FILLING AND THE
EQUIPMENT IT IS BEING APPLIED WITH.
1 GALLON COVERS APPROX. 325 SQ. FT. WWW.WEATHERWASHCOATIN GS.COM
WOOD PREP Surface must be free of sealers, stains, & conditioners
before staining. Prepare wood for staining by sanding with 80 grit
sandpaper with the grain.
PRODUCT PREP MIX STAIN WELL before and during use to ensure
settled materials are re-dispersed. Do not thin. First, TEST an
INCONSPICUOUS SWATCH. For best results, store and use only
when temperature is between 60-90°F (16-32°C) and relative
humidity is below 85%. Do not store in metal containers.
COVERAGE 1 gallon treats 325 sq. ft. of smooth wood.
APPLICATION Use a foam roller, rag, brush, or paint sprayer to
apply one liberal coat of stain in the direction of the grain. Wood
will absorb stain and each species will turn its own darkest color.
D o N O T apply an d w ipe off. DR EN C H the wo od evenl y to ens ure
consistent color. For exteriors, MIST may be applied on site and
w ill n ot affe
c
t groun d or pl ant life. Ho w ever, it ma y s tain
exposed concrete or siding.
DRYIN G TIM E Allow wood to dry 60 minutes. Longer dry times
for damp / humid climates, rough sawn & soft woods.
CLEAN UP Easy soap and water clean up.
FIN ISHES After a minimum of 1 hour apply your favorite
Weatherwash topcoat per the directions on the can.
CAUTION S Do not take internally. Keep out of reach of children.
In cas e of eye con tact flus h wi th large am oun ts of w ater.
Get medical attention if irritation persists. If swallowed do
not induce vomiting. Get medical attention immediately.
Why waste hours applying primers, paints, and glazes
when you can actually age wood? Weatherwash MIST
is a tannin-based, reactive stain, which naturally ages
wood in minutes. Woods that are high in tannic acid
will yield a lightly aged look in minutes instead of
centuries. Color results depend on wood species and
will create a natural-looking result without compromising
the grain. Weatherwash MIST can be top-coated
and will maintain color consistency.
AGE IN DEX Use for a lightly weathered look.
SPECIES H igh tan nin w oods like cedar, douglas fir
,
redw o od,
locust, and walnut. See our color chart online.
USE For us e on w ood w alls , ceilin gs , floors , cabin etry, furn iture,
millwork, siding, fences, etc.
Water-Based
Top Coat Compatible
VOC Free
Non Toxic
Commercial & Residential
Interior & Exterior
WARNING! Rem oval of old pain t by s an din g, s craping or other m eans m ay gen erate dus t or fum es that contain lead.
Expos ure to lead dus t or fum es m ay caus e brain dam age or other advers e health effec ts, es pecially in children or
pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective
equipm en t s uch as a properly fit
t
ed res pirator (NI OS H approved) and proper con tain m en t and clean up. For m ore
information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
21.25”
7.125”
1/2” NO PRINTING AREA
.5”
• OVERALL DIMENSION: 7 1/8” X 21 1/4”
• NO PRINTING AREA OF 1/2” TO ACCOMMODATE GLUE AREA OF LABEL
• GLUE LAP CAN BE ON EITHER END OF LABEL. DIFFERENT MACHINES USE DIFFERENT POSITIONS
• EAR HOLES ARE 1 3/8” IN DIAMETER. THEY ARE 10 1/4” APART, ON CENTER.
• IT IS BETWEEN THESE TWO HOLES THAT THE FRONT OF LABEL USUALLY FALLS.
DIRECTIONS COPY GOES HERE
FRONT COPY GOES HERE
10.25”
10.25”
7”
THIS TEMPLATE IS A GUIDE ONLY. YOUR ARTWORK SHOULD BE
COMPOSED TO FIT THE ACTUAL CAN YOU ARE FILLING AND THE
EQUIPMENT IT IS BEING APPLIED WITH.
1 GALLON COVERS APPROX. 325 SQ. FT. WWW.WEATHERWASHCOATIN GS.COM
WOOD PREP Surface must be sealer, stain, & conditioner free before
staining. Prepare wood for staining by sanding with 80 grit sandpaper
with the grain. NOT FOR USE ON PINE & TEAK.
PRODUCT PREP MIX STAIN WELL before and during use to ensure
settled materials are re-dispersed. Do NOT thin. FIRST TEST an
INCONSPICUOUS SWATCH. Wood will absorb stain and each species
will turn its own darkest color. For best results, store and use only
when temperature is between 60-90°F (16-32°C) and relative
humidity is below 85%. Do not store in metal containers.
COVERAGE 1 gallon treats 325 sq/ft. of smooth wood.
APPLICATION Use a foam roller, rag, brush, or paint sprayer to apply
one liberal coat of stain in the direction of the grain. Do NOT APPLY
an d w ipe off. WW is a reactive s tain , D REN C H the w ood even ly to
ensure consistent color. For exteriors, WW may be applied on site,
an d w ill n ot affec t groun d or pl ant life. Ho w ever,
WW may stain exposed concrete or siding.
DRYING TIM E Allow wood to dry 60 minutes before topcoating.
Longer dry times for damp / humid climates, rough sawn & soft
woods. Speed drying with warm temperatures & air circulation.
Clean up with soap and water.
FIN ISHES After a minimum of 1 hour apply your favorite Weatherwash
topcoat per the directions on the can. Weatherwash stains are water-
bas ed an d w ill n ot n egatively in teract w ith m os t fini shes .
CAUTION S Do not take internally. Keep out of reach of children.
In cas e of eye con tact flus h wi th large am oun ts of w ater. G et m edical
attention if irritation persists. If swallowed do not induce vomiting.
G et m edical atten tion im m ediately.
Why waste hours applying primers, paints, and glazes
when you can age wood in minutes? Storm is a
tannin-based, reactive stain , that naturally ages wood.
It is suitable for nearly all wood types and yields deep
weathered, grays in minutes, instead of centuries.
Unlike pigment based stains, latex paints, or oil based
stains, Storm won't compromise the woods' grain. Color
results depend on wood species and will create a natural-
looking result from plank to plank. Storm can be top
coated and will maintain color consistency.
AGE INDEX Extreme Weathering
SPECIES Nearly all wood types, like: maple, alder, cherry,
w aln ut, cedar, douglas fir
,
redw o od, bi rch, be ech, w hite,
and red oak. Not for use on pine or teak.
See our color chart online.
Interior & Exterior Stain
Water-Based
Top Coat Compatible
VOC Free
Non Toxic
Low Odor
WARNING! Removal of old paint by sanding, scraping or other means may generate dust orfumes that contain lead.
Expos ure to lead dus t or fum es m ay caus e brain dam age or other advers e health effec ts, es pecially in children or
pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective
equipm en t s uch as a properlyfit
t
ed res pirator (NI OS H approved) an d proper containm en t and clean up. For m ore
information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
44271 97198 9
DIRECTIONS
WEATHERWASH’S “STORM” PRODUCT OVERVIEW
WOOD PREP Sand wood with the grain. Do not apply pretreaters.
PRODUCT PREP Mix stain well before and during use to ensure
settled materials are re-dispersed. Do not thin. First, test and
inconspicuous swatch. For best results, store and use only when
temperature is between 60-90°F (16-32°C) and relative humidity
is below 85%. Do not store in metal containers
COVERAGE 1 Gallon treats 400 sq. ft. of smooth wood.
APPLICATION Use a foam roller, brush or paint sprayer to apply
one liberal coat of stain in the direction of the grain. Wood will
absorb stain. Each species will turns its own darkest color. For
exteriors, stain may be applied on site but avoid contact with
concrete or siding.
For darker results, multiple coats may be applied.
DRYING TIME Allow wood to dry 60 minutes. Longer dry times
for damp/humid climates, rough sawn & soft woods.
CLEAN UP Easy soap and water clean up.
FINISHES After a minimum of 1 hour apply your favorite
Weatherwash topcoat per the directions on the can.
Why waste hours applying primers, paints, and glazes when you can age wood in minutes?
Storm is a tannin-based, reactive stains, that naturally ages wood. It is suitable for nearly all wood
types and yields deep weathered grays in minutes, instead of centuries. With Storm, each wood
species will yield it’s own gorgeous color. Unlike pigment based stains, latex paints, or oil-based
stains. Storm won’t compromise the wood’s grain. Color results depend on wood specie is and
will create a natural-looking result from plank to plank. Stain can be top coated to maintain color
consistency.
AGE INDEX Extreme Weathering. Color results based on wood species.
SPECIES Nearly all wood types, like cedar, redwood, cherry, douglas fir, birch, beech, maple, alder,
hickory, locust, walnut, oak, etc. Not for use on pine, spruce, or teak. See our color chart.
USES For interior and exterior use, good for siding, walls, ceilings, floors, millwor k, cabinetry,
decks, fences, etc.