Installation Guide

BEFORE YOU BUILD
 Check your local building codes
 Verify neighborhood association
covenants regarding the height, design,
and material usage
 Apply for building permits if needed
 Consult ocial lot survey for boundary
lines and easements
 Mark all buried utility lines
MATERIALS (for each 8' section):
 Posts*: 4''x4'' (1 per section)
 Rails: 2''x4'' in either 8' or 16' lengths
 Pickets: 1''x6''x6'
• Stockade: 18
• Shadowbox: 19
• Board-on-Board: 19
 Rail Fasteners: 3'' hot-dipped galvanized
nails or screws (9 per section)
 Fencing Fasteners: 2'' hot-dipped
galvanized nails or screws (6 per picket)
 Gate Hardware
* Note: Post length will be determined by the fence height and
the hole depth which should extend below the local frost line.
TOOLS:
Other Supplies: Quick Set Concrete, Gravel, Hot-Dipped Galvanized Fasteners, Work Gloves, String, Goggles, Dust Mask, Hoe
Circular Saw
or Handsaw
Shovel
Post Hole Digger
or Auger
Hammer, Nail Gun,
Cordless Drill
Level
Tape Measure Wheel Barrow
FENCE
INSTALLATION
CONSTRUCTION TIPS
ON REVERSE SIDE
Do It Yourself