Installation Guide

Installation Instructions / Instructions d’installation
Shoe Rack Kit / Ensemble pour support à souliers
0335-SRK-CN
2700 Oak Industrial Dr. NE
Grand Rapids, MI 49505
800-253-1561
www.kv.com
[e-mail]
©2016 Knape & Vogt. KV and the KV logo are trademarks of Knape & Vogt. 310532/0616
Tools Needed:
• Phillips-head screw driver
Includes:
STEP 1: Remove the top plastic caps (it’s easier from the front) from the shelf brackets).
STEP 2: Insert the shelf brackets into the wall standards in the desired location (Figure 1).
STEP 3: If installing wood fascia, attach to the surround by fastening the included mounting screws
into pilot holes on the fascia. Do not overtighten.
STEP 4: Install the surround assembly by inserting the six shelf tabs into the slots on the shelf brackets
(Figure 2).
STEP 5: When fully seated, push the assembly towards the wall to secure the tabs to the bracket (Figure 3).
Install the plastic bracket cap on top to lock in place.
STEP 6: Place shoe rack into the surround assembly (Figure 4).
NOTE: Shoe rack is reversible.
Figure 1
éTaPE 1: Retirez les capuchons de plastique (c’est plus facile par le devant) des supports à tablette.
éTaPE 2: Insérez les supports à tablette sur les montants en position souhaitée (Figure 1).
éTaPE 3: Si vous installez la bordure de bois, xez-la au cadre en vissant les vis d’installation incluses
dans les trous guides de la bordure. Ne pas trop serrer.
éTaPE 4: Installez le cadre en introduisant les six taquets de la tablette dans les insertions sur les supports
à tablette (Figure 2).
éTaPE 5: Lorsque bien positionné, poussez l’ensemble vers le mur an de xer les attaches au support
(Figure 3). Installez les capuchons de plastique sur les dessus pour les verrouiller en position.
éTaPE 6: Positionnez le support à souliers sur le cadre (Figure 4).
NOTEZ: Que le support à souliers est réversible
Outils Requis:
• Tournevis Phillips
Contient:
ECN REV DATE DESCRIPTION APPR
30891 B 4/12/2016 PICTORAL REVISION RSS
30577 A 1/6/2016 RELEASE DRAWING KM/RSS
C
7/15/2015
0335-SRK
SHEET 1 OF 1
RSS
SHOE RACK ASSEMBLY
LJV
SHEET SIZE:
1:4
U.S.
™
®
®
PURCHASE
K
NAPE &
V
OGT
SCALE:
N/A
PART NO:
CHK'D BY:
DWN BY:
THIS DRAWING IS THE SOLE PROPERTY OF KNAPE & VOGT MANUFACTURING
COMPANY (KV) AND EMBODIES CONFIDENTIAL PROPRIETY INFORMATION.
ALL RIGHTS IN THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN
ARE RESERVED. THIS DOCUMENT IS PROVIDED IN CONFIDENCE FOR A
SPECIFIC PURPOSE AND MAY NOT BE USED, COPIED, OR DISCLOSED TO
OTHERS FOR ANY OTHER PURPOSE WITHOUT EXPRESS WRITTEN CONSENT OF
KV. BY ACCEPTING THIS DOCUMENT, THE RECIPIENT AGREES TO ABIDE BY
THE FOREGOING RESTRICTIONS AND TO RETURN THE DOCUMENT ON
REQUEST WHEN THE PERMITTED USE IS COMPLETE.
© 2012 KNAPE & VOGT MANUFACTURING COMPANY. ALL RIGHTS
RESERVED.
N/A
DATE:
DESCRIPTION:
MATERIAL:
材料
FINISH:
表面处理
PRODUCT ENGINEERING
CRITICAL DIMENSION
产品设计特性尺寸
MANUFACTURING PROCESS
CRITICAL DIMENSION
产品加工过程特性尺寸
TOLERANCE
UNLESS OTHERWISE
SPECIFIED
除图纸特别给定的公差
外,其他按自然公差处理
3 PL DEC .005
2 PL DEC
.015
FRACTIONS
1/64
ANGLES
1
DO NOT SCALE DRAWING
不要对图纸进行实际测量而获得尺寸值
XX
C
SHEET 1 OF 1
XX
SHEET SIZE:
METRIC DIMENSIONS SHOWN AS [ ] ARE
PROVIDED AS REFERENCE ONLY. ALL
TOLERANCES TO BE HELD TO ENGLISH
DIMENSIONS
图纸标注的公制尺寸仅供参考,所有尺寸以英制为准.
Figure 2
ECN REV DATE DESCRIPTION APPR
SCALE:
DESCRIPTION:
D
5/31/2016
DATE:
FINISH:
0335-SRND
SHEET 1 OF 1
DWN BY:
MATERIAL:
CHK'D BY:
-
PART NO:
N/A
TOLERANCE UNLESS OTHERWISE SPECIFIED
3 PL DEC .005 2 PL DEC .010 ANGLES 1/2
SHEET SIZE:
1:2
ECN REV DATE DESCRIPTION APPR
30891 B 4/12/2016 PICTORAL REVISION RSS
30577 A 1/6/2016 RELEASE DRAWING KM/RSS
C
7/15/2015
0335-SRK
SHEET 1 OF 1
RSS
SHOE RACK ASSEMBLY
LJV
SHEET SIZE:
1:4
U.S.
™
®
®
PURCHASE
K
NAPE &
V
OGT
SCALE:
N/A
PART NO:
CHK'D BY:
DWN BY:
THIS DRAWING IS THE SOLE PROPERTY OF KNAPE & VOGT MANUFACTURING
COMPANY (KV) AND EMBODIES CONFIDENTIAL PROPRIETY INFORMATION.
ALL RIGHTS IN THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN
ARE RESERVED. THIS DOCUMENT IS PROVIDED IN CONFIDENCE FOR A
SPECIFIC PURPOSE AND MAY NOT BE USED, COPIED, OR DISCLOSED TO
OTHERS FOR ANY OTHER PURPOSE WITHOUT EXPRESS WRITTEN CONSENT OF
KV. BY ACCEPTING THIS DOCUMENT, THE RECIPIENT AGREES TO ABIDE BY
THE FOREGOING RESTRICTIONS AND TO RETURN THE DOCUMENT ON
REQUEST WHEN THE PERMITTED USE IS COMPLETE.
© 2012 KNAPE & VOGT MANUFACTURING COMPANY. ALL RIGHTS
RESERVED.
N/A
DATE:
DESCRIPTION:
MATERIAL:
材料
FINISH:
表面处理
PRODUCT ENGINEERING
CRITICAL DIMENSION
产品设计特性尺寸
MANUFACTURING PROCESS
CRITICAL DIMENSION
产品加工过程特性尺寸
TOLERANCE
UNLESS OTHERWISE
SPECIFIED
除图纸特别给定的公差
外,其他按自然公差处理
3 PL DEC .005
2 PL DEC
.015
FRACTIONS
1/64
ANGLES
1
DO NOT SCALE DRAWING
不要对图纸进行实际测量而获得尺寸值
XX
C
SHEET 1 OF 1
XX
SHEET SIZE:
METRIC DIMENSIONS SHOWN AS [ ] ARE
PROVIDED AS REFERENCE ONLY. ALL
TOLERANCES TO BE HELD TO ENGLISH
DIMENSIONS
图纸标注的公制尺寸仅供参考,所有尺寸以英制为准.
Figure 4
ECN REV DATE DESCRIPTION APPR
SCALE:
DESCRIPTION:
D
5/20/2016
DATE:
FINISH:
0300-KITA
SHEET 1 OF 1
DWN BY:
MATERIAL:
CHK'D BY:
-
PART NO:
N/A
TOLERANCE UNLESS OTHERWISE SPECIFIED
3 PL DEC .005 2 PL DEC .010 ANGLES 1/2
SHEET SIZE:
1:8
ECN REV DATE DESCRIPTION APPR
SCALE:
DESCRIPTION:
D
5/31/2016
DATE:
FINISH:
0335-SRND
SHEET 1 OF 1
DWN BY:
MATERIAL:
CHK'D BY:
-
PART NO:
N/A
TOLERANCE UNLESS OTHERWISE SPECIFIED
3 PL DEC .005 2 PL DEC .010 ANGLES 1/2
SHEET SIZE:
1:2
Figure 3