Installation Guide
2
Technical Information
Recommended water pressure 15 - 75 PSI
Max. water pressure 145 PSI
Recommended hot water temp. 120° - 140° F*
Max. hot water temp 176°F*
Flow rate - 04215xx1 1.5 GPM
Flow rate - 04215xx0, 04216xx0 2.2 GPM
Hole size in mounting surface 1½"
Max. depth of mounting surface 2⅜"
English
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
•
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
15"
3¼"
7⅝"
9⅜"
21 ½"
max 2⅜"
⅜"
1⅜"
8¾"
9⅞"
2½"
13⅝"
21 ½"
max 2⅜"
3¼"
7⅝"
8¼"
1⅜"
7⅝"
8¾"
⅜"
04215xx0
04215xx1
04216xx0