Instructions / Assembly

Table Of Contents

3 Cutting Tools and Substrates

3.1 Cutting Tool Holder Types

♦ Note: Always use the Blade Holder that is appropriate for the thickness of your

material to help minimize the possibility of blade deflection.

Standard Blade Holders - Included

A. ½" (13mm) Blade Holder

This blade holder is used for foamboard, gatorboard,

PVC and corrugated plastic. Use this one for materials

up to ½" (13mm) thick.

B. Acrylic Blade Holder

This blade holder cuts acrylic and other fracture-

sensitive plastics, and polycarbonate up to ¼" (7mm)

thick.

C. Aluminum Composite Wheel Holder

This wheel holder is for cutting aluminum-faced sheet

material up to ¼" (7mm) thick. (This Wheel Holder has RED

marking on the rear edge that says ‘Alum. Composite’.)

Optional Blade/Wheel Holders:

D. ¼" (7mm) Blade Holder

This blade holder is used for foamboard, Gatorboard,

PVC, corrugated plastic and polycarbonate. Use this

one for materials up to ¼" (7mm) thick.

E. Glass Scoring Wheel Holder

This wheel holder is for scoring glass up to ¼" (7mm)

thick.

F. Aluminum Sheet Wheel Holder

This wheel holder is for cutting solid aluminum sheet

material up to .063" (1.5mm) thick.

(This Wheel Holder has

RED marking on the rear edge that says ‘Alum. Sheet’.)