Instructions / Assembly

1 ASSEMBLY
4
Preparation
a. Remove the Vertical Track assembly from the shipping carton with assistance from at least one
other person. Set the assembly onto two of the foam packing inserts so that the cutting head is
facing up (Figure a).
b. Slide the cutting head upward to the approximate
midpoint on the track, and lock it into position with
the locking knob (Figures a and b).
1.7 FSC Frame Assembly
1. Attach the Horizontal Brace Channel
(item #7) by partially inserting one M6
x 20 flat head screw (K) into the lower
hole on the left side of the Vertical
Track Assembly (Figure 1).
Support the left end of the horizontal
channel brace with another of the
foam packing inserts to stabilize the
assembly.
Figure b
Figure a
S
et on Foam
Packing inserts
Figure 1
Hardware bag a