Instructions / Assembly

1 ASSEMBLY
11
Figure 21
1.8 Wall-Mounting Option
Removing the Rear Leg Assembly for
Wall-Mounting
19. Using two 17mm wrenches, remove the
M10 bolt, washers, and locknut joining
the rear braces to the center rear leg
(Figure 19). Pivot the two braces upward
against the rear of the Vertical Track, and
set the bolt, washers, and nut aside for
now.
20. Remove the two (2) M10 bolts from the top
end of the Rear leg with a 17mm wrench.
Leave the two M10 bolts with sleeves in the
U-shaped slots in place (Figure 20), and
carefully remove the rear leg assembly
from the machine.
21. Attach the rear braces (now folded
upward) to the rear of the Vertical Track by
re-inserting the long M10 bolt (removed in
Step 19) through the braces and the pre-
drilled holes (Figure 21). Fasten securely
with two M10 washers and an M10
locknut, using two 17mm wrenches.
Remove
Leave in place
Figure 2
0
Remove bolt, fold braces up
Figure 1
9