Installation Guide

7
English Français Español
Place the faucet and sealing ring
on the mounting surface.
Install the plastic washer, friction
washer, metal washer, and
mounting nut.
If the mounting surface thickness
is greater than 1⅜", or if there is
insufficient space, omit the plastic
washer.
Tighten the mounting nut.
Tighten the screws.
Installation / Installation / Instalación
Placez l'anneau d'étanchéite
et le robinet sur la surface de
montage.
Installez la rondelle de plas-
tique, la rondelle en fibre, la
rondelle de friction, et l'écrou de
montage.
Si l'épaisseur du comptoir dé-
passe 1⅜ po, ou si l'espace dis-
ponible est insuffisant, omettez la
rondelle de plastique.
Serrez l'écrou de montage et les
vis de serrage.
Coloque el oro de sellado y
el grifo sobre la superficie de
montaje.
Instale la arandela plástica, la
arandela de fibra, la aran-
dela de fricción y la tuerca de
fijación.
Si el espesor de la mesada es
superior a 1⅜ pulg. o si no
hay suficiente espacio, puede
omitirse la arandela plástica.
Apriete la tuerca de fijación y
los tornillos.
1a
1b