SDS

181107-57 - PC-Concrete PRO Part B
Revision Date: 12-Nov-2018
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 4 / 9
7. HANDLING AND STORAGE
Precautions for safe handling
Advice on Safe Handling
Handle in accordance with good industrial hygiene and safety practice. Wear appropriate
personal protective equipment. Do not eat, drink or smoke when using this product. Wash
face, hands and any exposed skin thoroughly after handling. Contaminated work clothing
must not be allowed out of the workplace. Do not breathe vapors or spray mist. Obtain
special instructions before use. Do not handle until all safety precautions have been read
and understood.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up.
Incompatible Materials
Strong oxidizing agents. Strong acids.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Chemical name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Silica, Quartz
14808-60-7
TWA: 0.025 mg/m
3
respirable
particulate matter
TWA: 50 µg/m
3
TWA: 50 µg/m
3
excludes construction work,
agricultural operations, and
exposures that result from the
processing of sorptive clays
(vacated) TWA: 0.1 mg/m
3
respirable dust
: (250)/(%SiO2 + 5) mppcf
TWA respirable fraction
: (10)/(%SiO2 + 2) mg/m
3
TWA
respirable fraction
IDLH: 50 mg/m
3
respirable dust
TWA: 0.05 mg/m
3
respirable
dust
Titanium dioxide
13463-67-7
TWA: 10 mg/m
3
TWA: 15 mg/m
3
total dust
(vacated) TWA: 10 mg/m
3
total
dust
IDLH: 5000 mg/m
3
TWA: 2.4 mg/m
3
CIB 63 fine
TWA: 0.3 mg/m
3
CIB 63
ultrafine, including engineered
nanoscale
Other Information
If product is sanded, appropriate respirator should be worn to avoid breathing dust.
Pre-existing respiratory disorders may be aggravated by exposure. If sanded, this material
may generate silica / titanium dust. Inhaled silica / titanium has been classified by IARC as
a human carcinogen (see section 11).
Appropriate engineering controls
Engineering Controls
Provide general or local exhaust ventilation if product is sanded or ground.
Individual protection measures, such as personal protective equipment
Eye/Face Protection
Chemical safety goggles/faceshield. Refer to 29 CFR 1910.133 for eye and face protection
regulations.
Skin and Body Protection
Chemical resistant protective gloves. Wear suitable protective clothing. Reference Wiley's
"Quick Selection Guide to Chemical Protective Clothing". Refer to 29 CFR 1910.138 for
appropriate skin and body protection.
Respiratory Protection
Follow OSHA respirator regulations (29 CFR 1910.134) and, if necessary, wear a
MSHA/NIOSH-approved respirator.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or
smoke when using this product. Wash contaminated clothing before reuse.