Full Product Manual

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Assembly - Hanging the Fan

Hanging the fan-motor assemblyAttaching the fan to the electrical

box

□ Turn the power off.

□ Securely attach the mounting plate (A) to the outlet box (FF)

using the two screws (GG) supplied with the outlet box (FF).

Pull the 120-volt supply wires (the black, white and ground

wires) out of the outlet box (FF) and through the hole in the

mounting plate (A) and push them to the side.

□ Carefully lift the fan-motor assembly (C) and engage

the slot in the motor bracket on the top of the fan-

motor assembly (C) with the hook on the mounting

plate (A) so that it is securely suspended. Then

connect the wiring to your fan according to step 3

“Making the Electrical Connections”.

□ Once wiring is completed, lift the motor bracket on the

top of the fan-motor assembly (C) so that the threaded

studs (II) on the mounting plate (A) protrude through

the slot in the motor bracket. Securely tighten the

three locknuts (BB) onto the threaded studs (II), then

try to shake the fan-motor assembly (C) to ensure that

the assembly is tight.

NOTE: For better fan performance, make sure the

mounting plate is level. Additional washers (HH) (not

included) may be needed to insert between the outlet

box and the mounting plate.