Instructions / Assembly

Assembly — Attaching the Fan Blades

Fastening the blade

assemblies to the motor

Attaching the blades to the

blade arms

□ The fan motor assembly (G) is shipped with rubber

packing mounts (SS) to prevent movement during

transportation. Remove the six rubber packing

mounts (SS) from the fan motor assembly and

discard them prior to attaching the blade arms.

□ Attach the blades (I) to the blade arms (H) using the

three blade attachment screws and rubber washers

(BB) and the medallions (J). Start a screw and rubber

washer (BB) into a medallion (J), but do not tighten.

□ Repeat for the two remaining blade attachment

screws and rubber washers (BB).

□ Tighten each screw securely starting with the center

screw. Make sure the blade (I) is straight.

□ Repeat these steps for the remaining blades (I).

WARNING: To reduce the risk of personal injury, do not

bend the blade arms (H) while installing, balancing the blades

(I), or cleaning the fan. Do not insert foreign objects between

rotating fan blades (I).

Removing the rubber

packing mounts

□ Fasten the blade assemblies to the fan motor

assembly (G).

□ Tighten the two blade arm screws and lock washers

(JJ) already installed in the blade arms (H).

□ Repeat this procedure for the remaining blade arms

(H).