Instructions / Assembly

Assembly — Installing the Light Kit

Attaching the switch housing

to the mounting ring

□ Remove one of the three switch housing mounting

screws (KK) from the mounting ring (TT) and loosen

the other two screws (KK). (Do not remove.)

□ While holding the switch housing (K) under the fan

motor assembly (G), snap together the wire connec-

tion plugs (UU).

□ Place the key holes in the switch housing (K) over the

two screws (KK) previously loosened from the

mounting ring (TT). Turn the switch housing (K) until

the switch housing (K) locks in place at the narrow

section of the key holes. Secure by tightening the two

mounting screws (KK) previously loosened and the

one (KK) previously removed.

Attaching the light kit to

the switch housing

□ Remove one of the three light kit mounting screws

(LL) from the switch housing (K) and loosen the other

two screws (LL). (Do not remove.)

□ While holding the light kit (L) under the fan motor

assembly (G), snap together the two wire plugs (VV):

- White to white

- Black to blue

□ Place the key holes in the light kit (L) over the two

screws (LL) previously loosened from the switch

housing (K). Turn the light kit (L) until the light kit (L)

locks in place at the narrow section of the key holes.

Secure by tightening the two light kit mounting

screws (LL) previously loosened and the one (LL)

previously removed.

CAUTION: Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse

at the fuse box. Turning power off using the fan switch is not

sufﬁcient to prevent electric shock.

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.