Datasheet

BCM SENSOR TECHNOLOGIES BVBA
Brechtsebaan 2
B-2900 Schoten - Antwerpen, BELGIUM
Industriepark Zone 4,
Tel.: [phone]
Fax: [phone]
website: www.bcmsensor.com
email: [e-mail]
Model 166H/169H
Single Point Load Cells
Features
- parallel bending beam
- low profile
- capacity: 0.3, …, 70 kg(166H); 20, …, 200 kg (169H)
- accuracy: 0.05 %fs
- recommended platform size: 120 X 120 mm
- aluminum construction with surface anodized (166H)
17-4PH construction (169H)
- environment protection class: IP 65
Applications
- kitchen scales
- postage scales
- portable scales
Description
The "single point" load cells are made of parallel bending beam working principle. Only one unit is sufficient to
build up a scale. These load cells are moment insensitive. That is, when installed in a platform scale, it reads
the same regardless of the position of the load applied to the upper platform.
Model 166H/169H load cells are designed to this "single point" type. 166H load cells are manufactured from
high quality aluminum alloy of aviation standard, while 169H load cells are made from 17-4PH stainless steel.
166H/169H load cells can be regarded as the longer version of 166G/169G and can measure loads ranging
from 0.3 kg to 200 kg with the measuring accuracy of 0.05%fs (fs = full scale).
166H/169H load cells are widely used to manufacture postage scales, kitchen scales, portable scales and
other platform scales.
Dimensions
Electrical connection
excitation-, (black)
excitation+, (red)
shielding screen
signal-, (white)
signal+, (green)