Grosvenor Headboard Assembly Instructions Republic Design House
Grosvenor Headboard Assembly Instructions NOTE: Place all parts on a clean and smooth surface (rug, carpet) to avoid the parts from being scratched. NOTE: Follow assembly instructions step by step. NOTE: Do not completely tighten screws until the headboard is fully set up.
Grosvenor Headboard Assembly Instructions PART LIST: 1 Headboard 1pc 2 Legs 2pcs HARDWARE LIST: DESCRIPTION QTY A 2” BOLT M8 8 B M8 ALLEN WRENCH HEX NUT LABEL E PICTURE (to attach headboard to metal bed frame) LABEL PICTURE DESCRIPTION QTY C M8 FLAT WASHER 16 1 D M8 LOCK WASHER 8 4 F 2-1/2” BOLT M8 (to attach headboard to metal bed frame) Republic Design House 4
Grosvenor Headboard Assembly Instructions STEP 1: Remove legs and hardware from behind the headboard.
Grosvenor Headboard Assembly Instructions STEP 2: Using the provided hardware, attach legs to headboard. (See below diagram) Use the different hole patterns to customize the desired height of the headboard.
Grosvenor Headboard Assembly Instructions STEP 3: After all bolts have been tightened, re-apply velcro backing. STEP 4: After headboard is fully assembled, align slots at the bottom of headboard legs with attachment holes on metal bedframe, use the provided 2-1/2” bolts, washers & hex nuts to attach headboard to metal bed frame.
