Installation Guide

8
Description of System Components
2.10 Replacement Parts
HOME-FLEX® ttings require a retainer ring, a non-metallic gasket, and an o-ring for proper
assembly (see Figure 2.1 on page 4). Should any of these components be damaged or
misplaced, packs of replacement rings are available.
Part No. Description
11-05C
Two each of replacement
rings, gaskets, and o-rings
for ½" ttings
11-07C
Two each of replacement
rings, gaskets, and o-rings
for ¾" ttings
11-10C
Two each of replacement
rings, gaskets, and o-rings
for 1" ttings
2.11 HOME-FLEX® Appliance Connectors
HOME-FLEX® CSST cannot be used to make direct connections to moveable appliances like
gas ranges or clothes dryers (see Section 4.6 on page 29). Connection to these appliances
should be made from a HOME-FLEX® Termination Flange tting to a HOME-FLEX® Appliance
Connector, or comparable device. Appliance connectors are available coated and uncoated
in lengths of 12, 18, 24, 30, 36, 48, 60 and 72 inches.
Part No. Description
HFHC Series
3/8" O.D. (1/4" I.D.) tube suit-
able for water heaters and
devices with similar ow
requirements
HFDC Series
1/2" O.D. (3/8" I.D.) tube
suitable for dryers and
devices with similar ow
requirements
HFRC Series
5/8" O.D. (1/2" I.D.) tube
suitable for gas ranges and
devices with similar ow
requirements
HFSA Series
1" O.D. (3/4" I.D.) tube for
special applications