Installation Guide
Suggested Tools for Installation of HOME-FLEX®
For technical support call: 661-257-3923 or email: info@homeex.com
Use to cut HOME-FLEX® tubing to
desired length.
Note: Turn knob slowly while rotating
around the tubing to avoid bending or
crushing the tubing.
Tubing Cutter
Use to remove yellow protective jacket
at tubing end where the tting is to be
installed.
Utility Knife
Use to the retainer ring in place on
rst corrugation (or valley) of the
HOME-FLEX® tubing.
Slip-joint (or similar) Pliers
Use in tting assembly to fuse the CSST
and NPT ends of the tting.
Note: Hold the NPT end of the tting
steady while tightening from the CSST
end.
(¾" ttings require 1½" or larger wrench opening)
Crescent Wrenches (x2)
Gloves Eye Protection
Escanear el código QR de la derecha, o vaya a
es.homeex.com, para descargar la versión española
del Manual de Instalación y Diseño del Sistema.