Deluxe Aluminium PET DOOR Product Codes: #1168, #1169, #1170 IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. Installation video available at: www.hakunapets.
Parts List Tools Required A. B. C. D. E. F. G. • • • • • • • Inner door frame Outer door frame Locking cover 4x Screws 4x Nuts 2x Partition large 2x Partition small Jigsaw Scissors Drill with 10mm and 8mm drill bit Phillips Screwdriver Pencil Tape Measure/Ruler Duct Tape D A B E C Installation 1. X X 1. M easure the height (x) from the underside of the dog’s stomach to the floor. Mark height (x) on door/panel with tape or similar.
2. 3. X 2. C ut out template supplied in box, line up bottom of cut out with height (x) and trace onto door. Mark screw hole positions as well. 4. 4. U sing a reciprocating jigsaw, cut out the opening, cutting along the pencil outline. 3. D rill a hole in each of the 4 inside corners with a minimum of 10mm drill bit. 5. 5. C heck outer frame fits opening and screw holes align. Drill each of the screw holes using a 8mm bit.
6. X X 6. M easure the thickness of the door/panel and add 10mm (x) so the tunnel protrudes 5mm on each side. If required, cut partitions down to correct size. 7. 7. F it all 4 partitions into outer door frame, use duct tape to secure the corners then place into opening.
8. 8. I nsert nuts into outer door frame, and screw inner door frame into door/panel. Tighten with a Phillips head screw driver. If screws protrude trim the ends to be flush. WARNING: Over tightening of screws will cause damage. Security Screen Installation 1. 1. T ake the measurements needed to cut the opening by following steps 1-3 of the previous instructions. Using an angle grinder, cut out the opening.
2. X X 2. M easure the thickness of the door/panel and add 10mm (x) so the tunnel protrudes 5mm on each side. If required, cut partitions down to correct size. 3. 3. F it all 4 partitions into outer door frame, use duct tape to secure the corners then place into opening.
4. Outside Inside 4. I nsert nuts into outer door frame, and screw inner door frame into security screen. If screws protrude trim the ends to be flush. Locking Security Panel You can control your pet’s access using the locking security panel. Simply slide the panel into the channel on the inside frame until latch clips over the bottom of the frame.
TRAINING 1. U se a handful of your dog’s favourite treats, get your dog excited about the treats by letting them sniff and lick the treats without actually giving them one. 2. B efore starting your training, assess whether your dog would be more motivated to come in through the dog door or go out through it. If your dog loves being inside the house, you should start this training with them outside. If they’re always excited to get a chance to get outside, start with them inside the house. 3.
WARNING If your home has children as well as pets it is important to remember that children can misuse the pet door and gain access to potential hazards on the other side. You would certainly contravene municipal laws and be found guilty of an offence if there was a swimming pool on the other side of the pet door.
Warranty Certificate Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: Warranty The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase.
