Use and Care Manual

Attaching the Fan Blades

Step 1. Attach blades to blade arms using three

screws with fiber washers. (Fig. 9) Start a screw

into the blade arm, do not tighten. Repeat for the 2

remaining screws and washers.

Step 2. Tighten each screw securely starting with

the center screw. Make sure the blade is straight.

Repeat steps for the remaining blades.

Step 3. Fasten the blade assemblies to the motor

housing by lining up the slots of the blade arms

with the tabs on the motor housing, then tighten

the two screws and washers already installed in the

blade arms. (Fig. 10)

Figure 9

Blade Arm

Screws with

Fiber Washers

Blade

Figure 10

Motor

Blade Assembly

Slot

Tab

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY,

DO NOT BEND THE BLADE ARMS WHILE

INSTALLING, BALANCING THE BLADES, OR

CLEANING THE FAN. DO NO INSERT FOREIGN

OBJECTS BETWEEN ROTATING FAN BLADES.