TDS
4/24/17
Aluminum Foil
Synthetic Rubber
Unbleached Natural Kraft Paper
1.89 in x 50.3 yd (48 mm x 46 m)
1.89 in x 9.8 yd (48 mm x 9 m)
! !
!
!
!
!
!
!
!
!
Mold and mildew resistant
!
!
25 Forge Parkway Franklin, MA 02038
1-800-343-7875 Fax 1-800-328-4822
www.nashuatape.com
Standard Shelf Life (at 25 °C): 36 months from date of manufacture
The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualified technical personnel. To Berry Plastics' knowledge it is true
and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that
the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are typical values submitted only for the user's
information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fitness for a particular purpose), or a representation for which
BERRY PLASTICS assumes any legal responsibility.
Flame Spread
10
VOC Content
< 1 g/L
Smoke Developed
25
Recommended Storage Conditions: 60 - 80 °F at 40-60% RH
Tensile Strength
11 lb/in
19.26 N/cm
ASTM D-1000
Operating Temperature
40 to 200 °F
4 to 93 °C
Metric UOM
Test Method
Adhesion to Steel
75 oz/in
8.21 N/cm
PSTC-101
Aluminum Foil Backing
Conformable to fit corners and joints
UV and moisture resistant
Total Thickness
3.2 mils
81 μm
ASTM D-1000
UL 723 Classified
Meets flammability requirements for use on
Class 1 duct
Low VOC Content
Can contribute toward satisfying EQ Credit 4.1
(Low Emitting Materials) under LEED®
Typical Test Values
Standard UOM
Sheet metal repair and maintenance applications
Features
Benefits
Synthetic Rubber Adhesive
Extreme high tack, aggressive bond to surfaces
Good all-weather performance
Non-solvent for less odor and low VOC content
Applications
Sealing joints and seams in duct work for A/C,
General purpose industrial and automotive uses
heating, and ventilation systems
Sealing and patching insulation materials
Backing:
Adhesive:
Liner:
Specifications:
Colors:
Aluminum
Available Size:
UL 723 Classified
MULTI-PURPOSE
322
HVAC