Instructions / Assembly

STEP 2:________________________________________________________________________________________

Insert Seat B, below the arm and above the top Spindles. The Place left side of rocker D-L over the tenons that are facing up and

Seat B is marked front and back. You will not be attaching the align. Try to get most tenons partially started into mortises. Gently

Seat B at this time, but will not be able to insert it after this step tap down.. Fig. 6

Fig. 5

Fig. 5 Fig. 6

STEP 2:________________________________________________________________________________________

Begin at the top of the post and begin tapping the

left side D-L until the tenons are seated into the mortises.

This is much easier with two people.

Fig. 7