SDS
Page 5/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 11/06/2019 Reviewed on 11/06/2019
Trade name: SILICONE OXIM QO12A
(Contd. of page 4)
49.4.23
ꞏ
Exposure controls
ꞏ
Personal protective equipment:
ꞏ
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
ꞏ
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use respiratory protective device that is independent of circulating air.
ꞏ
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
ꞏ
Material of gloves
Nitrile rubber, NBR
Recommended thickness of the material:
0.35 mm
ꞏ
Penetration time of glove material
>480min
ꞏ
Eye protection:
Goggles recommended during refilling.
*
9
Physical and chemical properties
ꞏ
Information on basic physical and chemical properties
ꞏ
General Information
ꞏ
Appearance:
Form:
Pasty
Color:
Various colors
ꞏ
Odor:
Characteristic
ꞏ
Odor threshold:
Not determined.
ꞏ
pH-value:
Undetermined.
Not determined.
ꞏ
Change in condition
Melting point/Melting range:
Undetermined.
Boiling point/Boiling range:
>300 °C (>572 °F)
ꞏ
Flash point:
> 100 °C (> 212 °F)
ꞏ
Flammability (solid, gaseous):
Not applicable.
ꞏ
Ignition temperature:
>200 °C (>392 °F)
ꞏ
Decomposition temperature:
Not determined.
ꞏ
Auto igniting:
Product is not selfigniting.
ꞏ
Danger of explosion:
Product does not present an explosion hazard.
ꞏ
Explosion limits:
Lower:
Undetermined.
Upper:
Undetermined.
ꞏ
Vapor pressure:
Undetermined.
ꞏ
Density at 20 °C (68 °F):
1.02 g/cm³ (8.51 lbs/gal)
(Contd. on page 6)
US