User manual

11
ConneCting the Control box
10
armrest assembly
Place the armrest onto the top of the upper
shaft, lining up the central hole in the
armrest with a hole in the aluminium shaft.
Position the armrest to suit your arm length.
(Holding the Detector, p. 16)
Insert the screw up through the stand,
upper shaft and armrest. Tighten the
screw, being careful not to overtighten and
damage the thread.
With the velcro side facing upwards, thread
the armrest strap through both slots in the
armrest. Ensure the end of the strap will be
fastened outwards from your arm.
Connecting
With the LCD facing up, push the control
box onto the end of the handle until it ts
into place.
The control box may be easily removed for
packing and transport in a carry bag.
Disconnecting
Brace the detector rmly against yourself,
grasp the control box and pull it away from
the handle.
The X-Terra is designed to be used in
both the left and right hand.
This diagram shows the velcro strap
threaded outwards for the left arm.