Installation Guide

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist” 
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
Ribbon & Reed Bullet Door Stop
Item# 13092
Dimensions:
• Overall Height: 2-1/16”
• Diameter: 1-3/8”
• Maximum Clearance: 1-5/16”
• Weight: 9-1/2 oz.
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Locate the stop in desired position on floor so door
knob doesn’t come in contact with wall.
2. Remove the top of the bumper by twisting
3. Mark and drill pilot hole
4. Reposition the stop to the desired location and
screw stop securely to floor with screwdriver.
5. Place the rubber bumper ring onto the stop and
place the top of the stop.
Catalog Section: D
Ribbon & Reed Bullet Door Stop
Item# 13092
Date: Rev 01/18