Instructions / Assembly

ManualsBrandsUnbranded ManualsCraft StorageComet Collection 45.5 in. W x 23.5 in. D PB Craft Sewing Table in White with Black Frame

Thank you for purchasing our Studio Designs, Inc.

Gracias por comprar nuestro mueble Studio Designs, Inc.

Merci d’avoir acheté un meuble Studio Designs, Inc.

COMET HOBBY CENTER

#13332 Black/White • Negro/Blanco • Noir/Blanc

Ofce: 562.942.0492

Product Support Line: 866.942.0492

Rev. 7.12.2016

Summary of content (8 pages)

PAGE 1
Thank you for purchasing our Studio Designs, Inc. Gracias por comprar nuestro mueble Studio Designs, Inc. Merci d’avoir acheté un meuble Studio Designs, Inc. COMET HOBBY CENTER #13332 Black/White • Negro/Blanco • Noir/Blanc Office: 562.942.0492 Product Support Line: 866.942.0492 Rev. 7.12.
PAGE 2
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. Screwdriver required for assembly. If you require any assistance with assembly, parts, or information on other products, please visit our website: www.studiodesigns.com or call or write us. Check screws, nuts and bolts periodically (or every 6 months). Tighten if necessary.
PAGE 3
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 1. Left Leg Pata Izquierda Jambe Gauche 1 2. Right Leg Pata Derecha Jambe Droite 1 3. Rear Bar Barra Trasera Barre Arrière 1 4. Rear Panel Panel Trasero Panneau Arrière 1 5. Bottom Shelf Estante Inferior Étagère Inférieure 1 6. Top Mesa Table 1 7. Side Shelf Estante Lateral Étagère Latérale 1 8. Left Bracket Soporte Izquierdo Support Gauche 1 9.
PAGE 4
PARTS LIST / LISTA DE PARTES / LISTE DES PIÈCES DÈTACHÉES DESCRIPTION / DESCRIPCIÓN / DESCRIPTION QTY / CANT/ QTÉ 12. Floor Leveler Nivelador de Piso Niveleur de Plancher 4 13. Allen Bolt - 1/4" x 1-3/4" Perno Allen - 6mm x 45mm Boulon Allen - 6mm x 45mm 2 14. Allen Screw - 3/16" x 2-3/8" Tornillo Allen - 5mm x 60mm Vis Allen - 5mm x 60mm 8 15. Phillips Screw - 1/2" Tornillo de Cruz - 12mm Vis Cruciforme - 12mm 16 16. Shelf Hitch Enganche de Estante Pince d’étagère 2 17.
PAGE 5
1 15 15 17 8 18 9 15 7 18 18 16 15 16 17 18 6 Comet Hobby Center p.
PAGE 6
2 12 Support bar faces out - see arrow. Barra de soporte hacia afuera - vea la flecha. Barre de support face à l’extérieur - voir le flèche. 1 12 12 19 2 13 12 19 19 3 19 19 13 18 10 18 10 11 Install Supports (10), then set Platform (11) aside until later step. Instale Soportes (10), luego aparte la Plataforma (11) hasta un paso más tardío. Installer les supports (10), puis sépare la Plateforme (11) à une étape ultérieure. Comet Hobby Center p.
PAGE 7
3 14 Holes face rear. Agujeros hacia atras. Trous vers l’arrière. 4 5 Holes face up. Agujeros hacia arriba. Trous vers le haut. Insert into the hitch. Inserte en el enganche. Insérer dans le pince. 14 4 20 Caution: Use two people. Precaución: Use dos personas. Précaution: Utilisez deux personnes. Comet Hobby Center 11 20 p.
PAGE 8
LIMITED WARRANTY Studio Designs (the “Company”) warrants to the original purchaser that this product will be free from defects in its workmanship and materials, under normal residential use and service conditions, as described herein.