Instructions / Assembly

Making the electrical

connections

Assembly — Hanging the Fan (continued)

□

If you wish to install an optional wall control, use this diagram

as a guide but refer to the installation manual for the wall

control for the correct color and wire connections.

PP: Fan wall control

QQ: Light wall control

RR: Fan wall control output wire

SS: Light wall control output wire

WARNING: To avoid possible electrical shock, be sure

electricity is turned off at the circuit breaker or main fuse box

before wiring.

WARNING: Check to see that all connections are tight,

including ground, and that no bare wire is visible at the wire

nuts, except for the ground wire.

□

Connect the black (HH) and blue (II) color wires from the

fan to the hot wire (black) (JJ) from the ceiling.

Connect the white (KK) color wire from the fan to the

neutral wire (white) (LL) from the ceiling.

□

If there is a ground wire (MM) (green color or bare copper

color) in your outlet box, connect the green wire (NN)

from the fan to it. If there is not a ground wire in your

outlet box, connect the green wire (NN) from the fan to

the green wire (OO) from the mounting bracket (C).

Secure the wire connection with the plastic wire nuts (DD).

Follow the steps below to connect the fan to your house

supply wires. Secure the wire nuts (DD) supplied with your fan

by wrapping the connections with electrical tape.