Datasheet

1. Features & Application

·Adopt thermosetting plastic or thermoplastic

·Small contact gap,snap action,high sensitivity and small operating travel

·Variety of levers

·Widely used in appliance,electronic equipment ,automatic machine,communicat

-ion equipment,car electric,apparatus and instrument,electro motion tool etc

2. Model & Meanings

3. Technical Specification

Item Data

Operation speed 1mm-1m/s

Operation

frequency

Mechanical 240times / min

Electrical 20times/ min

Insulation resistance

100MΩ

Contact resistance

25 MΩ(initial value)

Withstand Voltage Non-connection wire 1000VAC

DATASHEET

Micro Switch

Item no. 1426619

Version 03/16

PAGE 1
DATASHEET Micro Switch Version 03/16 Item no. 1426619 1. Features & Application ·Adopt thermosetting plastic or thermoplastic ·Small contact gap,snap action,high sensitivity and small operating travel ·Variety of levers ·Widely used in appliance,electronic equipment ,automatic machine,communicat -ion equipment,car electric,apparatus and instrument,electro motion tool etc 2. Model & Meanings 3.
PAGE 2
Vibration Impact Life Every terminal 1500VAC Misoperation 10-55HZ(amplitude)1.5mm Durable 1000m/s Misoperation 300m/s Electrical 100,000times above Mechanical 1,000,000times above -25-80℃ Ambient operating temperature ﹤85% Humidity Rating voltage (V) Rating current (A) Ith current (A) AC-250 15 20 AC-125 15 20 DC-250 0.3 0.45 DC-125 0.6 0.75 4. Outshape and mounting dimensions. □9x4 30.2±0.5 9.5 17.8 20.5 3 25.4±0.25 2-□ 4.2 +00. 1 25.4±0.1 49.5 Max 11.9 A 17.
PAGE 3
5. Mounting Hole 2-□4.2 25.4±0.1 6. Contact Form COM 7. Structure 8. Terminal NO NC + 0.
PAGE 4
9. Certifications CCC,CE, UL,TUV 10.Tolerance standard: GB/T 1804-M >6-30/±0.2 >30-120/±0.3 Distributed by Conrad Electronic SE This data sheet is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.