Installation Guide

1A
Install the Fixture
2
Using the provided self-tapping screw, install the c clip approximately 1.5” from the bottom of each side of the recessed can
housing. Ensure that the c clips are leveled and directly across from each other.
Utilisation de la vis fournie autotaraudeuse, installez le c clip environ 1.5" à partir du bas de chaque côté de la boîte boîtier
d'encastrement. Assurez-vous que les c clips sont nivelées et juste en face de l'autre.
Utilizando el tornillo autorroscante proporcionado, instalar el c clip de aproximadamente 1.5" de la parte inferior de cada lado
de la caja empotrada. Asegúrese de que los c clips se nivelan y directamente enfrente de la otra.
1
1.5”
C CLIP
SCREW
VIS
TORNILLO
C CLIP
BOTTOM OF RECESSED
CAN HOUSING
FOND DE LA BOÎTE À ENCASTRER
PARTE INFERIOR DE LA CAJA DE EMPOTRADO
1
1
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.SeaGullLighting.com
© 2016 Sea Gull Lighting.All rights reserved.The "Sea Gull Lighting" graphic is a
registered trademark of Sea Gull Lighting.Sea Gull Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company