Use and Care Manual

METAL ROOFING ITEMS: Must be stored properly in transit or on the job site.
DO NOT: Store metal roofing panels, trims, flashing or roof edges in an open area
where moisture can accumulate.
ALWAYS COVER: Bundle metal products with breathable tarps (not plastic) and
store on a slant for water drainage.
WARRANTY: Failure to comply with these procedures relieves the manufacturer of
responsibility for and resultant damages to or deterioration of the product voids all
warranties. There is no implied warranty of merchantability or fitness for purpose.
Warning! Sharp Edges!
CAUTION! SHARP EDGES
Wear protective eyewear, clothing and gloves
CAUTION!
Working above grade is inherently dangerous, be sure that proper fall protection
measures are in place. When working with power tools and sheet metal, gloves
and eye protection are absolutely required.