SDS

ENSUEÑO SPRING FRESH - SDS FP-6050489 Rev. 2 Page 4 of 7
White Mineral Oil
8042-47-5
5 mg/cm
3
5 mg/cm
3
Appropriate engineering controls:
Eye washers
Ventilation requirements
General ventilation X Local ventilation Unnecessary in normal cond.
Work practices: Follow good manufacturing practices for housekeeping and personal hygiene. Wash any
exposed skin immediately after chemical contact and before breaks and meals, and at the end of each work
period. Contaminated clothing and shoes should be thoroughly cleaned before re-use.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Viscous opalescent liquid
Color and odor:
blue color and characteristic scent
Boiling point (°C):
NA
Melting or freezing point:
ND
Flash point (°C):
NA
Decomposition temperature:
ND
Fire point (°C):
NA
Auto ignition temperature (°C):
ND
Density (g/ml):
0.960 – 1.030
Vapor density:
ND
Molecular weight:
NA
Volatility:
ND
Percent volatile 100°C:
92.9 – 94.0
Vapor pressure (mmHg @ 20°C):
ND
Lower explosion limit (%):
NA
Upper explosion limit (%):
NA
pH:
3.0 – 4.0
Viscosity (cPs):
400 -800
Solubility in water:
Dispersible
Solubility in others:
ND
Partition coefficient:
n-octanol / water
ND
Odor threshold:
ND
SECTION 10 – STABILITY AND REACTIVITY
Reactivity:
May react with very oxidant substances and other cleaning products.
Chemical stability:
Stable X Unstable
Possibility of hazardous reactions:
Not under normal handling of product.
Conditions to avoid:
None known.
Incompatible materials:
None Water Acids Alkalis Oxide X Other
known
Hazardous decomposition products:
Carbon dioxide and carbon monoxide may be produced.