User manual

WinPC-NC Light What can WinPC-NC Light do ?

WinPC-NC main screen

• extensive tool management function, tools can be selected

individually, colors can be set

• speeds can be set between 0.01 and approx. 1000 mm/s

• high-performance integrated editor

• lots of external signals for synchronizing the procedure, e.g. start

signal, machine ready and much more

• units of dimension can be set to mm, inch and mm/s, mm/min and

inch/min

• multilingual, other languages can easily be retrofitted,

ger-eng-ita-turk-spa-port-pol (date 6/06)

• supports various additional signals and sensors

• ..there are many other features besides these

Also available

for SMC800

and SMC1500

stepper motor

cards

According to version WinPC-NC Economy is also available for the

common SMC800 and SMC1500 stepper motor cards. When you

order, please note that you have to indicate either clocking/direction

or SMC version. Each version disposes of an individual motor

signal, a reversal function of the program is not possible.

Using the SMC version and a SMC800 or SMC1500 stepper

motor card unfortunately there are not all functions available.

This is due to the electrical and technical structure of the SMC

cards.

- 10 -