User manual

WinPC-NC Light First steps
The detected port address has to be registered in WinPC-NC under
parameter-ports- LPT.port address and complete the process by
clicking the function keys SAVE and OK.
After this procedure it should be possible to perfom a simple test run
with function JOG or MOTOR TEST. Please be very careful in
performing and be aware of uncontrolled movements of the machine.
i
When first delivered, the LPT port address is registered with
0378hex. This applies for nearly all internal ports.
Detailed instructions concerning start-up procedure are given in a
separate chapter.
2.6. Exiting WinPC-NC
You can exit WinPC-NC at any time by clicking the cross in the box
at the top right of the window, or by selecting EXIT from the FILE
menu.
- 17 -