User manual

WinPC-NC Light Operating WinPC-NC
Press the (Alt-F) shortcut key to open the menu.
MOVE-START
After a working file has been loaded, the START menu item can be
used for processing the job. Pressing the (F3) key or clicking the
START button has the same effect.
WinPC-NC controls the X and Y motors during move commands.
The Z motor moves up and down during tool movement commands.
Progress display During machining, a window displays the progress as a percentage.
In additon the realtime file display is available where the current
performed command line is marked by a cursor bar.
Display of progress and speed override
A working process can be cancelled by clicking the STOP button in
the progress display window, or by pressing the
(ESC) key. The
machine brakes all axes without losing any steps and switches off the
spindle and the cooling function.
MOVE JOG
The JOG menu item calls up the manual setup function for the
machine. This function can also be accessed by pressing the
(F5)
function key or with the jog button.
- 24 -
Start F3
Jog F5
Joystick jog shift-F5
Reference move F8
Select tool