User manual

WinPC-NC Light Operating WinPC-NC
In addition to the predefined distances, it is possible to enter any
distance in the text box.
Switching
additional
signals
Clicking the check boxes with the mouse is all that is required to
switch the additional signals drilling spindle and coolant pump. This
switches the signals on or off. Both signals are switched off when
you exit the JOG function.
During manual movement, it is possible to move
and store certain help points. After a position has been
reached, it is easy to click the Save button to select the
required point and save it permanently as a
parameter.
Moving to saved help points is just as staightforward.
All that is required is to click the Move to button and
select the required help point. Then the machine
moves to it.
Movement in progress can be interrupted at any
time by clicking the Stop button.
The JOG function can be exited by clicking the the
Exit button.
MOVE JOYSTICK JOGGING
As an alternative to the mouse and keyboard, it is also possible to
move the machine manually using a connected joystick. This is of
advantage for observing the movements directly on the machine and
setting exact positions. It is easier to take a joystick to the machine
than keyboard or mouse.
i
Prior to use a connected joystick it must be configured in the
Windows system and calibrated with a special function.
Jogging with
joystick
When setting up the machine with the joystick, movement in the X
and Y-axis directions can be achieved simply by tilting the control
handle. Moving the Z-axis requires pressing joystick button 1 as
well.
A help point can also be stored directly at the machine using the
joystick. The stored position can be selected by repeatedly pressing
joystick button 2. To store the position itself, press button 2 at the
same time as holding button 1 pressed.
- 26 -