User manual

WinPC-NC Light Parameter settings
4.5. Miscellaneous parameters
The miscellaneous parameters include various switches and other
settings which are not assigned to any other group.
Miscellaneous parameters
Start and end position
This switch specifies where the start and end point of each working
process should be located. The machine also moves to the position
after reference movement.
There are 3 possible start and end positions :
Stop WinPC-NC stops at the reference position
after reference movement, and at the last
coordinate after each job process
Zero point The machine moves to the defined zero point
after reference movement and after each
job process.
Park position WinPC-NC moves to the defined parked
position after reference movement and after
each job process.
It is a good idea to move to a certain position after the working
process if space is required in order to change the workpiece.
- 47 -