User manual

WinPC-NC Light Parameter settings
4.7. Signals and dwell times
All input signals and associated parameters are grouped in a separate
dialog box.
Signal parameters
Input signals
Synchronisation with input signals ist available in WinPC-NC
Economy and Professional only.
Dwell time after Z up and Z down
In many applications, it is a good idea or indeed a requirement to
wait a moment after the tool has been lowered or raised, before
starting X and Y-axis movements. This may be the case when
working with flexible materials or if you want the tool to freewheel.
The waiting time is defined in milliseconds.
Spindle acceleration time
Acceleration
time for drilling
spindle
The start delay defines a waiting time in milliseconds which always
counts down when the additional Drilling spindle output signal is
activated.
This ensures that the drilling spindle has enough time to accelerate
before it is used for the first time.
- 54 -