User manual

WinPC-NC Light Parameter settings
4.8. Maschine parameters
Machine-specific parameters include all settings which relate to the
mechanical characteristics of the machine. Only some or even none
of these parameters are present in certain OEM versions of WinPC-
NC. Instead, the parameters will have already been set correctly in
advance for the machine in question.
i
Always take the greatest possible care when setting or modifying
any machine-specific parameters, in order to avoid machine
defects.
For a better view the machine parameters are grouped in further
windows which can be displayed by clicking the corresponding
buttons.
Machine-specific parameters
Axis resolution
The resolution boxes define the number of motorsteps per rotation. If
you are using gear units or step down/step up ratios, you can enter the
calculated values here directly.
The unit is steps.
Distance per rotation
You have to use this parameter to define what distance is moved
during one motor rotation. Defining the axis resolution with two
- 55 -