User manual

WinPC-NC Light Initial start-up with the machine
5.4. Determination of direction
Call the function JOG MOVE and move all axes with the cursor
button or by mouse clicking to the arrow buttons and check machine
direction.
Each button corresponds to a certain axis or direction. Please start
with axis X.
Arrow keys showing to the right side are to start a positive movement
of the X-axis, i.e. following movement to the right of the machine.
Arrow keys showing to the left side are to move the machine left in
opposite direction.
If this is not the case, one of the following errors may have occured...
Error Possible cause Solution
Machine does
not move
Incorrect port
Incorrect port pinning
Maschine off
Port adjustment
Control of pinnings
Check whether motors
are energized and
provide supply
Movement of the
wrong axis
Incorrect port pinning Control and adjust the
port pinnings
Axis X moves
always in
opposite
direction, i.e.
moves to the left
by activated
right-hand arrow
and the other
way round
Direction signal works
with incorrect logic
Change the parameter
INVERT MOVE
DIRECTION under
machine parameters
After checking the X-axis a further test of the both other axes is
advisable. If necessary, please correct move direction by parameter.
- 65 -