User manual

WinPC-NC Economy Additional Information
Example:
Drilling cycle
as subroutine
%prog2
N001 G90
N002 G00 X110 Y100
N003 L1
N004 G00 Y110
N005 L1
N006 G00 Y120
N007 L1
N008 G00 X0Y0
N009 M30
N020 G98 L1
N021 G01 Z20
N022 G00 Z0
N023 G01 Z25
N024 G00 Z0
N025 G01 Z30
N026 G00 Z0
N027 G98 L0
Start of program
Absolute coordinates
Rapid traverse to 1st position
Call drilling cycle
Next position
etc...
End of program
Define drilling cycle
End of subroutine
7.1.5. ISEL NCP interpreter
The format ISEL NCP is common to many users and mainly used by
machines and units of the companies ISEL and MES from the Isert
group. WinPC-NC is able to interprete commands of NCP programs,
excepting track data and track sections.
Simple change
from ISEL
machines
With this option it is quite simple to process by WinPC-NC current
NCP programs with an alternative machine.
Interpreted commands are for example :
FASTVEL VEL
MOVEABS FASTABS
MOVEREL FASTREL
PLANE CCWABS
CWABS CCWREL
CWREL WAIT
GETTOOL HALT
SPINDLE COOLANT
- 104 -