User manual
WinPC-NC Economy Additional Information
Program and graphical display of an ISEL NCP program
7.1.6. Postscript interpreter
As an additional interpreter a postscript import filter has been
implemented in WinPC-NC which filters vector information out of
common postscript files, e.g. as it is created by Adobe Illustrator® or
Corel Draw®. Other postscript informations in the files are
uninteressting for CNC processing and are disregarded.
Please create PS files always without header. Unfortunately, a
realtime display of the program of postscript files can not be
indicated.
7.2. Error messages
Error messages are displayed in a small window in the middle of the
screen during operations in WinPC-NC.Messages in a gray box do
not indicate there is a fault, but only provide information.
The following error messages may occur :
• Limit switch reached
The machine has moved on to one of the limit switches. It is necessary to move
back from the switch and perform reference rung again before continuing work.
• Machine not ready
The connected controller or machine is not ready or not switched on. WinPC-NC
works in demo modes.
- 105 -