User manual

WinPC-NC Economy Additional Information
• Maschine positioned on the reference switch
You intend to execute a reference move, however there is at least one axis already
positioned on the reference switch. Start moving back all axes from the switches by
manual operation.
• Cannot install file
WinPC-NC tried unsuccessfully to install a file. Possibible causes are insufficient
memory capacity or missing allowance for access in the current register.
•Out of memory
There is insufficient vacant main memory space for processing actions by WinPC-
NC. Please extend the virtual memory in the system control and restart WinPC-NC.
• Hardlock error
There is problem with recognizing the USB-dongle. Please remove the dongle, if
necessary, reinstall the drive and insert it into another USB port. Restarting of the
drive is made by calling the file SETUPDRV.EXE in the directory of WinPC-NC.
• Incorrect realtime-DLL
There are communcation problems between the actual realtime module and
WinPC-NC which are probably caused by another licence.
7.3. Special versions of WinPC-NC
Special
applications
on request
The authors are always grateful for opinions and suggestions.
If required, hardware and software solutions can be worked out for
your special application, or our standard products can be adapted to
optimize their functions for you. Please ask us for a quote without
obligation.
- 108 -