User manual

WinPC-NC Economy First steps
• note the port address under which the LPT port is registered in the
system. With onboard ports it is usually the port address 0378hex.
Locating the LPT port by means of the device manager
The detected port address has to be registered in WinPC-NC under
parameter-ports- LPT.port address and complete the process by
clicking the function keys SAVE and OK.
After this procedure it should be possible to perfom a simple test run
with function JOG or MOTOR TEST. Please be very careful in
performing and be aware of uncontrolled movements of the machine.
i
When first delivered, the LPT port address is registered with
0378hex. This applies for nearly all internal ports.
Detailed instructions concerning start-up procedure are given in a
separate chapter.
2.6. Exiting WinPC-NC
You can exit WinPC-NC at any time by clicking the cross in the box
at the top right of the window, or by selecting EXIT from the FILE
menu.
- 17 -