User manual

WinPC-NC Economy Operating WinPC-NC
appears as a hand. With it, you can click and drag any point to move
the image to where you want.
The movement track is displayed as a line while you are dragging.
Once you release the mouse button, the graphic appears in the new
position to where you have moved it.
Display original size
Clicking this symbol restores the original size and position. This
undoes all zoom and move actions.
Define current machine position
The current machine position is represented by a small red dot in the
graphic.Using the function described here, you can position the NC
file in the way that the
current machine position
corresponds exactly to a
point or a certain position in
the file. The file zero point is
simply recalculated
internally.
Using this method it is quite
simple to position the
workingpiece and the NC file
with great accuracy.
Cancel function
Once a zoom, move or positioning action has been started, it can be
cancelled by clicking the cancel button. The cursor reverts to its
normal arrow shape.
Turning data
By clicking the TURN button it is possible to turn the indicated data
by 90°. In this way it is easier to place the data on the material.
Selecting the display area
By means of the button AREA the grahical display can easily be
changed. So it is possible to display only the piece to be produced
and it's corresponding data. There is also the possibiblity to display
the defined workpiece area or the stipulated machine size with the
current position. In this way it is easy to recognize the location of the
piece and whether it can be worked without any problems within the
defined limits.
- 20 -