User manual
WinPC-NC Economy Operating WinPC-NC
SPECIAL FUNCTION-TEACHIN
By means of the function TEACHIN simple programs in various
formats can be created by moving and following the contours.
Special function teachin
Creating
programs
interactive
The new program is displayed in the teachin window on the left side
of the dialog. In the top part actions can be activated prior to the
teachin process.
The large window on the right-hand displays all available actions, e.
g. selecting the tool, speed settings, operating the spindle and cooling
and provides the possibility to produce various contour shapes.
i
Executing commands depends on the selected data format.
Commands as switching the spindle or cooling are useless with
the HPGL format.
Teachin
step by step
Gradual procedure with teachin :
1. Execute reference move and call up teachin function
2. Stipulate the desired data format and determine the zero point by
moving
3. Start teachin process. Now the program head will be automatically
set up and displayed in the program window.
4. In the following steps you can create as many contour elements as
necessary for the desired program either by moving the new line
ends or by definition of circle points. Tool changes and
unproductive movements to new start points and plunge positions
are possible.
- 37 -