User manual
WinPC-NC Economy Operating WinPC-NC
5. Click on exit button and the program is automatically finished.
6. The new created program should be stored before leaving the
function.
Possible actions during the teachin process are as follows :
Move line Moving to a new position. This moving step is either an operation in
open curcuit with high speed or immersed with feed rate. Several
lines can be teached successively and the function is left if no other
movement has taken place.
Circle arc Teachin of a circle or arc is taking place with always three points.
The first point is also the current position. First any point on the
circle arc is being moved to and finally the final point. By these three
points a circle or arc command can be cleary created.
Accept This function inserts the actual position of to the cursor bar into the
program.
Delete Deletes the line of the cursor bar. With this function it is also
possible to delete and correct previous commands.
Exit Inserts the necessary commands for exiting the program and finishes
the new created NC program.
i
New commands are always inserted at the actual cursor position
and enables the user to make up for overlooked actions.
3.3.5. HELP-menu
There are three items in the help menu:
HELP-TOPICS
The HELP TOPICS function gives you access to the help system. A
dialog box appears containing the main selection.
- 38 -
Help topics...
Liability
About WinPC-NC