User manual

WinPC-NC Economy Parameter settings
Following settings are possible :
Machine reset Only with restarting WinPC-NC it is
or possible to place back the override values
program reset to 100%
New file Values are placed back by loading a new NC
file
Job start Reset of the values is made by the following
start of an job process.
4.3. Coordinates
In the Coordinates dialog box it is possible to define all parameters
relating to dimensions, help points and the unit of measurement.
Setting the working area and the help positions
Additional paramaters can be obtained by means of further buttons, e.
g. admittance of a repetition function, activation and paramater
setting of tangential cuts or circular engravings.
Machine and
workpiece
coordinates
It is necessary to distinguish between two types of position
definitions. There are absolute machine coordinates with their zero
point at the machine reference point. Then there are workpiece
coordinates with their origin at the workpiece zero point.
- 49 -