User manual

WinPC-NC Economy Parameter settings
With the parameter knife lift you can determine the height in
millimeters, in which the cutter is lifted prior to rotation. This should
be setted in the way to avoid damages of the material to be cut.
Lift with PU/PD
Lifting the cutter during rotations is normally directly effected by the
program. However, if macros are used which are working solely with
Lift and Lower commands, lifting of the cutter can be forced by this
parameter with PD and PU commands integrated in HPGL data.
This parameter is only applicable using macros.
Rotation of max. 360 degree
With certain tangential heads it is impossible to carry out rotations
over 360 degree because there can be strokes or overstripped cables.
Limitation of
cutter rotations
An activated parameter carries out rotations always within the limits
of 0 to 360 degree. Movements requiring cutter rotations over this
limit are stopped, the cutter will be resetted and then movement will
be continued.
Sample for foil cutting with tangential axis
4.4. Data format and associated parameters
WinPC-NC can read and process various data formats. The format of
the NC file can be selected manually or registered using an automatic
recognition function.
- 57 -