User manual

WinPC-NC Economy Parameter settings
Button orientation
Adapting the
movement
direction of the
buttons
It is possible to use 4 settings to rotate the X and Y-axis directions
through 90 degrees at a time in order to adapt the orientation of the
movement buttons in jog mode to take account of the machine
orientation.
Button orientation position 0
Button orientation position 1
Positions 2 and 3 turn the X and Y buttons through further 90 degree
steps.
Program repetitions
The program repetitions parameter enables you to repeat a working
process up to 999 times. This enables series production to be
achieved in conjunction with a start signal.
Smoothing contours
Filter for
producing finer
contours
WinPC-NC is equipped with a filter in order to smooth contours and
sheets consisting of many small vectors. This is necessary for
producing fine and neat edges.
The paramter defines a factor of 0-2000.
- 66 -