User manual

WinPC-NC Economy Parameter settings
Automatic repeat
Perform
the process
repeatedly
When the start signal is active, it is possible to use this parameter to
make WinPC-NC wait for the next start signal as soon as it finishes
a working process. This means no input from the keyboard or mouse
is required.
Dwell time after Z up and Z down
In many applications, it is a good idea or indeed a requirement to
wait a moment after the tool has been lowered or raised, before
starting X and Y-axis movements. This may be the case when
working with flexible materials or if you want the tool to freewheel.
The waiting time is defined in milliseconds.
Spindle acceleration time
Acceleration
time for drilling
spindle
The start delay defines a waiting time in milliseconds which always
counts down when the additional Drilling spindle output signal is
activated.
This ensures that the drilling spindle has enough time to accelerate
before it is used for the first time.
4.8. Maschine parameters
Machine-specific parameters include all settings which relate to the
mechanical characteristics of the machine. Only some or even none
of these parameters are present in certain OEM versions of WinPC-
NC. Instead, the parameters will have already been set correctly in
advance for the machine in question.
i
Always take the greatest possible care when setting or modifying
any machine-specific parameters, in order to avoid machine
defects.
For a better view the machine parameters are grouped in further
windows which can be displayed by clicking the corresponding
buttons.
- 70 -