User manual

WinPC-NC Economy Parameter settings
Machine-specific parameters
Axis resolution
The resolution boxes define the number of motorsteps per rotation. If
you are using gear units or step down/step up ratios, you can enter the
calculated values here directly.
The unit is steps.
Distance per rotation
You have to use this parameter to define what distance is moved
during one motor rotation. Defining the axis resolution with two
parameters offers the advantage that no calculation inaccuracies can
arise.
The unit is millimeters with decimal places.
Maximum speed
You should use the MOTOR TEST function to ascertain the
maximum speed of each axis. This represents the absolute top limit
speed with which the axis can be moved.
WinPC-NC monitors the speed entries made in all other parameter
windows and always corrects them to the value defined here.
The unit is millimeters with decimal places.
- 71 -