User manual

WinPC-NC Economy Parameter settings

Checking reference switches

Reference move

exclusive with

vacant switches

Prior to a reference move the parameter induces WinPC-NC to

check the switches. Only if each defined switch is vacant a reference

move can take place.

This test makes sense if several reference switches are connected on

the LPT port by a single input line and if it is not possible for

WinPC-NC to recognize the axis currently placed on its switch.

In case if the reference move should be rejected due to one or several

actuated switches, it is necessary to move the switches free by the

function JOG.

Settings of the 4th axis

Parameters of the 4th axis

WinPC-NC Economy is able to manage and process a 4th axis.

Programming can be effected, for example, by a G code program. An

other possibiblity is the automaic direction rotation of the tangential

axis by WinPC-NC.

Prior to use the 4th axis has to be enabled. Otherwise the

parameter settings are not available.

Some of the paramters as speeds, inverting the dircection and

reference switch are acting in the same way as for axes XYZ and not

explained at this place.

- 76 -